Rover C II (2005-2009)

August 18, 2009
This product has been updated. View the current product version: OKM Rover C4

The grave and tomb detector Rover C II is one of the leading products of the Rover Series in regard of functionality and performance. It is a combined detector including the features of the metal detector Rover C and the geoelectrical detector Cavefinder. Thus, it can be used to search for buried metals like treasures or boxes and to find hidden rooms, graves, tombs and other underground cavities.

OKM Treasure Hunter operating the Rover C II with the Supersensor
Rover C II with Super Sensor: Treasure hunting with metal detector Rover C II with connected Super Sensor.

Tomb and grave detector

The combined functions of geoelectricity and metal detection make the treasure hunting detector Rover C II specially interesting for archaeologists, cavity seekers and treasure hunters searching for buried precious materials, tomb treasures or valuable antique objects inside tombs and graves.

The treasure hunting metal detector Rover C II can be used for the following purposes:

  • general cavity detection
  • tomb detection
  • cemetary surveys or grave site investigations
  • localization of grave chambers and included metallic objects
  • treasure hunting (research of buried treasures like boxes, chests, vases)
  • metal detection (gold, silver, ferrous metals, precious metals)
  • detection of sepulchral tumulus and barrow, Egyptian tombs, historical grave chambers
  • localization of sarcophagus, reliquary caskets, crypts, treasure chambers, quest of the Grail
  • 3D ground mapping

The treasure hunting 3D metal detector Rover C II can be used inside old buildings or ruins to look for buried materials or voids underground as well as inside churches to look for crypts or hidden chambers, hallways or tunnels.


Visualization and analysis of discoveries and finds

Due to the Rover C II a 3D ground mapping is possible to visualize the scanned terrain and its buried metals or voids. In the software Visualizer 3D the treasure hunter or archeologist is able to find out position, size and depth of located items.

These objects and structures can be detected with the treasure hunting metal detector Rover C II:


Combination of two devices

As a combination of metal detector and cave detector, Rover C II offers a graphical ground scan and a geo-electrical measurement.

When using the geoelectrical measurement you can define a rectangular scan area by placing 4 electrodes inside the ground. By measuring the ground resistance and its variations it is possible to locate specially voids like empty rooms, tunnels or bunkers in high depths.

OKM Rover C II connected with electrodes
Rover C II with electrodes: Cave detector Rover C II with connected geoelectrical electrodes for cavity detection.

Besides the standard probe for 3D ground scanning, you can connect the high resolution Super Sensor. The combination with the professional software Visualizer 3D allows graphical measurements in high resolution, and thus offer valuable clues to the depth and size of located objects. The Super Sensor is specialized to locate precious metals in high depth. It can find metal targets deeper than the standard probe.

OKM Treasure Hunter operating the Rover C II
Super Sensor connected with Rover C II: The image shows how to use the Super Sensor with Rover C II.

By using the Super Sensor and the Visualizer 3D software it is also possible to distinguish between ferrous and non-ferrous metals. This is especially important for treasure hunting. Hence, treasure hunters is able to determine, if detected finds are valuables or just iron targets, and can decide if it is profitable to start digging at this place.


Functionality of Rover C II

The multipurpose metal detector and ground scanner provides various detection modes:

Thanks to the integrated microprocessor technology, ground balance, depth measurement and data storage will be performed automatically by the device. The evaluation of the measured data takes place at the computer, where the scanned area can be analysed in a three-dimensional graphic with the help of the software Visualizer 3D.


Easy-to-use and ready-to-start equipment

Using the Rover C II cave and metal detector is easy and can be learned in a short time. Hobby treasure hunters and metal detectorists can use the device without any difficulties.

A mini laptop with pre-installed 3D software Visualizer 3D software and bluetooth technology is delivered for free with every purchase of the treasure hunting metal detector Rover C II. The device is ready to use in the field and start metal detecting for treasures right right away.

This powerful metal detector package with light weight and small baggage is the perfect equipment for outdoor treasure hunting needs.

This product has been updated. View the current product version: OKM Rover C4


French Archaeologist Discovers Secret Door of Machu Picchu with OKM Rover C II
February 27, 2013

French Archaeologist Discovers Secret Door of Machu Picchu with OKM Rover C II

Archaeologist discovers a new underground chamber in the Inca city of Machu Picchu in Peru with OKM Rover C II. ...

Knights Templar Treasure Hunt: Archaeological Expedition to Poland
June 01, 2022

Knights Templar Treasure Hunt: Archaeological Expedition to Poland

OKM followed an expedition to Poland searching the underground near and in the church for graves of the Knights Templar. ...

Military Archaeology: Poisk.Pro Discovers Hidden Tunnels at the Arpad Line
February 14, 2020

Military Archaeology: Poisk.Pro Discovers Hidden Tunnels at the Arpad Line

As one of the most effective fortification systems during World War II, the Arpad Line and its bunker complex endured ...

Find your perfect OKM detector