- Classic: Long-range detector with two different detection methods and visual locating software to locate hidden gold treasures at long distances
- Detection range: Customers found treasures in a range of 10 km (6 miles)
- Use cases: Treasure Hunting, Gold Prospection
- Scan modes: Ionic / Bionic
- Detectable objects: Gold nuggets, gold coins, jewelry
Mon - Fri 9 am - 5 pm Sat - Sun by appointment only
Languages: عربي (AR), English (EN), Deutsch (DE)
Long-Range
Wireless Technology
Rechargeable High-Capacity Battery
LED Lighting
Speaker
Long-Range Gold Detector with Android Smartphone
The long-range detector Bionic X4 is used to find buried objects at long distances. By using cross pinpointing the exact position of the located object can be determined.
The Bionic X4 long-range gold detector has been developed especially for gold seekers, gold prospectors and treasure hunters, who look for gold at far distances. Unlike traditional long-range detectors, the Bionic X4 can be combined with an Android Smartphone to visually locate gold targets.
Colonial Era Gold Artifact detected in South America with OKM Bionic X4
In South America, near an old path to the capital, lies a historically rich area with abandoned colonial mines. An ...
Gold Coins Detected with Bionic X4
Gold coins were found with OKM long range detector in Iran. The coins are attributed to Mahmut Ghazan, a descendant ...
Treasure hunter detects gold and silver coin hoard with Bionic X4 in Iran
A treasure hunter from Iran detected a fabulous treasure by using his long-range gold detector Bionic X4. He recovered a ...
Detection Methods for Gold Hunting
The Bionic X4 long-range gold detector supports two different detection methods to locate hidden gold treasures:
Ionic Detection Method
(Ions-Chamber-System)
The Ionic Detection Method measures the ions radiation (ions absorbent) of buried gold objects. This detection method is only able to locate long time buried gold artifacts.
Bionic Detection Method
(Bio-Energy-System)
During the detection of gold the Bionic Detection Method interacts with the Bio-Energy of the operator’s body to analyze minimum changes of object substances. Thereby the Bionic X4 gold detector is able to locate almost all gold objects. Independent of the age of the gold, the Bio-Energy-System can be used to find freshly buried gold, long time buried gold as well as golden artifacts that are not buried.
The fully automated Bluetooth connection between smartphone and Bionic X4 transfers scan data directly to the smartphone where the data is mapped to the display. Thus, the treasure hunter is able to see the bearing, direction and image through the smartphone camera and fix it for later analysis.
Gold Prospection and Treasure Hunting with Long-Range Detectors
Thanks to the dual scan methods the Bionic X4 gold detector is usable for many tasks like gold prospecting. The main application of this gold long-range detector is the detection of buried gold, i.e. gold jewelry, gold statues, gold rings, gold coins or gold bars (gold bullions).
The Bionic X4 works not only in dry grounds, it is also suitable for humid places, wet soils and can be used after rainy days without any limitations.
The long-range detector reaches best performances in sparsely populated areas. Since the Bionic X4 is very sensitive to changes of the ionic and bionic fields, the accuracy increases greatly in undisturbed or undeveloped areas.
Features and Characteristics
Using the included Android Smartphone increases the Bionic X4 functionality and usability:
- Digital compass for navigation (directional reference)
- Optical fixation of detection direction
- Visual focusing of targets
Gold Hunting with Bionic X4
The Bionic X4 gold long-range detector is especially used for a fast research and prospecting, to explore areas where hidden gold treasures may be buried. It can be used for a first quick examination of an unknown terrain to find places of interest and buried gold treasures, so it is advisable for gold prospectors and treasure hunters who don’t have any clue where to start detecting. The gold prospector can easily and quickly get a general overview of large areas.
The Bionic X4 is especially designed for inaccessible areas where it is hardly possible to walk. Reasons can be accrued forests, rocky mountains or rock faces.
The treasure hunter will use the Bionic X4 gold detector to scan the horizon and find a direction where a higher probability of hidden gold objects can be expected. As soon as the gold direction has been determined, the permanent acoustical signal of the detector will change and the detected direction can be fixed within the display of the Android Smartphone.
To find out the exact position of the gold you have to process a triangulation bearing with the Bionic X4 gold detector. Therefor you have to scan from at least two or more different directions and check if the detector is always responding to gold. As soon as you confirm two or more positive signals, the point of intersection from all directions marks your potential place of gold.
Bionic X4 and Rover UC Bundle
Since the Bionic X4 long-range gold detector is not able to provide any indications about depth and size of the buried gold objects, it is recommended to use a further 3D ground scanner to conduct a detailed ground scan analysis. A very good choice is the Rover UC, which also uses the Android Smartphone as controller and field data analyzer.
By using the Bionic X4 you can locate the place where a high probability of gold may be buried under the ground and the Rover UC can detect the exact position and dependent on the ground conditions the depth and size of the gold artifacts or items of great value.
OKM Rover UC
Metal Detector disguised as Trekking Pole with SmartwatchTreasure Hunting
OKM Search Services
| 1x | Control unit |
| 1x | Smartphone with USB cable and charger |
| 1x | Waterproof and shock resistant Pelican case |
| 1x | Wireless headphones with batteries |
| 1x | Power Pack with charger and travel adapter |
| 1x | User’s manual |
Control Unit
- Dimensions (H x W x D): 260 x 140 x 220 mm
- Weight: approx. 780 g
- Input voltage (max.): 12 V DC
- Processor / Main CPU: Atmel AtMega CPU, 14.7 MHz
- Operating temperature: 0°C – 70°C
- Storage temperature: –20°– 60°C
- Waterproof: No
- Operating time: 16 hours (without smartphone at USB), 8 hours (smartphone at USB)
- Air humidity: 5% – 75%
- Feedback: acoustic, visual
- Indication: OLED
Laser
- Operating temperature: 15°C – 35°C
- Laser beam distance: max. 150 m
- Laser output: max. 3 mW
- Emitted wavelength: 650 nm
- Laser class: 3R (EN 60825-1:2007)
Data Transmission
- Technology: Bluetooth 5.1
- Frequency: 2.402 – 2.480 GHz
- Maximum Transfer Rate: 1 Mbps
- Maximum Transmitting Power: +8 dBm
- Maximum Range: approx. 10 m
Computer Minimum Requirements
- Interface (data transmission): USB 2.0
- Free disk space: minimum 250 MB
- Working memory (RAM): 2 GB
- Display: 1920 x 1080
- Processor: 1.2 GHz
- Graphics card: 1 GB RAM, OpenGL 3.3
- Operating system: Windows 10
Other long-range devices on the market are less expensive but don't work. I am very convinced and happy to use Bionic X4 by OKM.
Fantastic customer service by OKM - initially, I had difficulties using the Bionic X4 but OKM helped me thoroughly and it is working perfectly.
I looked at many long-range products on the market but Bionic X4 is the best! Highest quality.
I had an appointment in OKM's headquarters in Germany and the team took several hours finding the perfect device. Ultimately, I chose the Bionic X4 as it is the most reliable long-range product on the market. I am super happy with the usability and functionality of the device. The OKM team did a great job in developing this product! I can highly recommend it.
I trust OKM - they are on the market for 20 years and always produce highest quality!
Bionic X4
Product Flyer
Languages: English, Deutsch, Français, Español
Last updated: February 03, 2020
File size: 692.94 kB
Bionic X4 App
Quick Start Guide
Language: English
Last updated: September 19, 2014
File size: 3.55 MB