Metal Detector Future I-160
High resolution detector
All of our metal detectors and geophysical detecting instruments are part
of the "FS - Future Series", a line of our latest technology to detect buried
objects and underground structures. Beside the measuring instruments it includes
our 3D Software which assures a detailed analysis of the measured results.
The Future I-160 is based on an electromagnetic pulse method which can be used
to select anomalies in the target area. Thus the device is able to detect different
structures and natural features of the ground like for example:
- metal canisters, tanks, boxes
- voids, backfillings, grave chambers, caves and tombs
- steel pipes and water conduits
- water deposits
The Future I-160 is a professional measuring instrument with a very high resolution
antenna of 50 cm width. Compared to the Future 2005 with its 100 cm antenna the
Future I-160 has a four times higher density of measured data. Compared to the
Earth Imager with its 16x lower resolution the device is most suitable for the
professional archeological and industrial use. This fact is reflected also in
the grafical representation inside the 3D-Software.
Detailed graphics are the basis for an exact determination of the size and
depth of objects. Because of the compact form of the antenna the device is
not only usable for the measurement in even ground conditions. Besides the
usual graphical representation the device provides two more particularities.
On the one hand it makes buried object immediately visible with the horizontal
live picture and on the other hand a typified ultrasound scan can be created
with the vertical antenna.
The device includes the following functionality:
- accoustical magnetometer
- high resolution ground scans in 3D
- live picture with horizontal ground scan antenna
- live picture with vertical pin pointing antenna
- graphical analysis on a computer
Because of the integrated microprocessor technology ground balance,
depth measurement and data storage will be performed automatically
by the device. The evaluation of the measured data takes place at
the computer where the scanned area can be analyzed in a three-dimensional
graphic with the help of the 3D-Software.