How to Get Best 3D Scan Images

07 اكتوبر 2020

Many users ask what their scans are showing. In fact, a successful analysis requires not only the ability to "read" the scan image properly, but also to create a good scan image. In this tutorial we explain how to get really good scan results with OKM ground scanners.

How to perform a Ground Scan (example with Rover C4):

YouTube Video

How to achieve best Ground Scan images

YouTube Video
OKM Guide to 3D Ground Scanning

Tip #1 – Orientation of the Probe

The correct position of the sensor guarantees good scan images: Make sure that you keep the probe straight while measuring!

Special Feature Orientation Sensor: The professional ground scanner eXp 6000 has an integrated orientation sensor that warns its user when the probe is held incorrectly.

OKM Guide to 3D Ground Scanning

Tip #2 – Direction of the Probe

The correct position of the sensor guarantees good scan images: Make sure that you do not pivot the probe while measuring! When using a vertical probe e.g. the Super Sensor, make sure that the arrow on top points in the direction of your scan line. Do not pivot or rotate the probe while performing ground scans.

OKM Guide to 3D Ground Scanning

Tip #3 – Distance to the Ground

Try to keep the probe always at the same distance above the ground surface during the scan (same distance as for ground balance before the measurement). If there are branches or stones in the scan field, lift the sensor higher for the ground balance to ensure a constant distance to the ground during the measurement.

OKM Guide to 3D Ground Scanning

Tip #4 – Direction of the Scan Lines

Experience shows that scans in north-south (or south-north) orientation produce better scan image results. If you can, follow the natural magnetic field of the earth when measuring, i.e. ideally perform your scan by walking your scan lines parallel to the meridians (longitudes).

OKM Guide to 3D Ground Scanning

Tip #5 – Preparation of the Scan Field

If you do not yet have a precise idea where to start measuring, it is often useful to first search the target area with the scan mode magnetometer. In this way first objects can be located and the ground can also be cleared from uninteresting objects such as ferrous waste. As a result, the subsequent Ground Scan can provide more informative results.

OKM Guide to 3D Ground Scanning

Tip #6 – Pace during the Measurement

For each scan line, walk slowly to collect enough measuring points (impulses) for a good scan image. The more measuring points are collected, the more detailed the scan image can be displayed. In this way, even smaller or hidden objects can be detected.

OKM Guide to 3D Ground Scanning

Tip #7 – Number of Scan Lines and Impulses

Reduce the distances between the measuring lines and/or scan more lines to collect enough measuring points (impulses) for a good scan image. The more measuring points are collected, the more detailed the scan image. In this way, even smaller or hidden objects can be detected.

OKM Guide to 3D Ground Scanning

Tip #8 – Distance between Scan Lines

Try to scan the measuring lines always at the same distance to each other in order to obtain an accurate and correct scan image. In this way you avoid later analysis errors and do not miss small objects or objects hidden between the measuring lines.

OKM Guide to 3D Ground Scanning

Tip #9 – Constant Speed for all Scan Lines

If possible, always walk the scan lines at the same speed to obtain an accurate and correct scan image.

If a constant speed is not possible due to unevenness or obstacles in the scan field, it may be helpful to switch from automatic to manual impulse mode.

OKM Guide to 3D Ground Scanning

Tip #10 – Accuracy of the Measurement

Keep the measuring points (grid) as accurately as possible to obtain a correct and good scan image. This is easy to achieve by measuring each scan line always at the same speed and by keeping the distances between the lines always the same.

OKM Guide to 3D Ground Scanning

Tip #11 – Advantages of the Manual Mode

The manual mode can be particularly useful if there are larger obstacles in the scan field. If you have to climb over tree trunks or remnants of walls during the measurement or large undergrowth prevents you from walking at the same speed, you should try the manual mode. In this way the scan points (impulses) are not collected in the predefined speed, but only whenever you press the button on the probe / control unit. This ensures similar distances between the measuring points (grid).

OKM Guide to 3D Ground Scanning

Tip #12 – Advantages of the Parallel Scan Mode

Ground scans can be performed in two ways: parallel or zig-zag. Since it is important that the probe always points in the same direction, the parallel mode is especially recommended for beginners.

With parallel scan, the measurement is performed line by line always heading in the same direction. In this way the speed and the distances can be kept quite easily.

In zig-zag scan you either walk backwards - this can lead to errors in the measurement due to different walking speeds or deviations from the grid - or you turn on the spot, but the scanning direction of the probe must remain the same (then pointing to you).

OKM Guide to 3D Ground Scanning

Tip #13 – Adjustment of the Scan Field

Even if all instructions are followed, it is possible that the majority of the measuring field does not show any anomalies in the center, but reveals interesting signals at the edge of the field. If this is the case, move the measuring field so that the area of interest is located in the center of the scan field or that the boundaries of the target object can be identified.

Check your Scan Data with a Control Scan

Once you have followed all the instructions and received a good scan image, check it with a second measurement. The so-called control scan is performed exactly like the first one: same scan field dimensions and same number of measurement points (impulses). If this control scan also shows the same patterns, you can be sure that the displayed anomalies are detected structures.

By the way: For each scan analysis by OKM a control scan is required. Beside the actual scan, the respective control scan has to be submitted in order to analyze the scan results as exactly as possible.


Download OKM 3D Ground Scan Guide

In our 3D Ground Scan Guide you find further details on how to use OKM ground scanners correctly to receive clear and meaningful scan images:

Get the OKM 3D Ground Scan Guide (PDF, 1.1 MB):

Download 3D GS Guide

OKM Care
OKM Scan Analysis OKM Scan Analysis
OKM Remote Support
OKM Device Check
OKM Detector Training OKM Expert and Trainer Frank Casser on site with OKM Gepard GPR 3D
OKM Visualizer 3D Activation Pack OKM Visualizer 3D Activation Pack
OKM 3D Software Training OKM Expert and Trainer Frank explains how to operate the OKM detector software


Tutorial Visualizer 3D Studio Scan Analysis
14 يوليو 2022

V3DS Tutorial Interpreting Scans

Learn now how to analyze and interpret your scans better in V3DS...

Fusion Pro Plus Quick Tutorial Connection
14 مارس 2022

Fusion Pro Plus Quick Tutorial Connection

You need to connect your Fusion Pro Plus to your Windows notebook if you want to configure...

OKM RoadShow at SofiaDetectors Draws Detectorist Crowds Across Borders
13 فبراير 2024

OKM عرض الطريق في صوفيا ديتكتورز يجذب العديد من الضيوف عبر الحدود

اجتذب معرض OKM RoadShow في صوفيا ديتكتورز الباحثين عن الكنوز من بلغاريا ومقدونيا وصربيا. أبرز الأحداث: التدريب على أجهزة الكشف، ...

اعثر على الكاشف المثالي هنا